The guys over at Bicycling Australia have 5 last minute tips to get your bike in top shape for this weekend’s event.
Check out the full article below!
“With the Bowral Classic a week away it’s an important time to ensure your bike is up for the challenge. Whether you’re riding the 25, 90 or 160km course, follow this simple check list to help ensure all goes smoothly on the big day.
Clean your Bike
Cleaning your pride and joy is one of the simplest but best things you can do for it.
A clean bike is often a reliable one. Give your bike a thorough clean after your final training ride. Pay close attention to all components while you’re there looking closely at the frame, checking for wear or cracks along with inspecting forks, fittings, mounts, pedals and the drivetrain.
Check your Tyres & Brakes
Closely study both the front and rear tyres. Look for wear, flat spots, any foreign objects that may have been picked up on a recent ride?
Check your brake pads. Is there plenty of life let in them? Are they wearing evenly? If the pads are still OK ensure they are making correct and even contact with the rim. Adjust if required.
If you do replace your pads prior to the ride pay close attention to pad orientation and always ensure the open end faces toward the rear of the bike. Check the back of the new pads for L or R and fit them to the correct side of the calliper. While you are there check your rim for wear. Like brake pads, most rims have wear indicators. If the wear indicator is gone, the rim needs to be replaced.
Check Your Chain
Nothing lasts forever, particularly a bike chain. One of the bike’s most critical components, the chain is often overlooked when performing routine checks prior to a ride. Chains should be cleaned, thoroughly checked and properly lubricated regularly. With a life of around 2000kms depending upon conditions and where you ride, if in doubt change it.
Wipe your chain and re-lube it after every second ride and particularly before a big event such as the Bowral Classic.
Check Your Quick Release Skewers
Quick releases can be a magnet for dirt and grime. Carefully clean around your skewers when preparing your bike for an upcoming ride or event. The cam action of a traditional quick-release system is all that’s keeping your wheels under you so ensure these are correctly adjusted and tensioned. Tighten the nut (not the skewer) to a point that the skewer can be pushed firmly into the locked position.
Check Your Hex Head Bolts
Ensure all hex bolts are tight and set at the tensions recommended by the manufacturer.
All bike owners should have a decent set of Allen keys. Check all bolts as, over time, it’s surprising what will gradually come loose. Stick to the recommended torque settings, especially with carbon.
Book A Service At Your Local Bike Shop
Finally – nobody knows a bike like a trained bicycle mechanic. Most bike shops offer various levels of a bike service – from a quick check and tune up (recommended prior to a race or ride) through to a full strip down and rebuild. One of life’s sweet pleasures, it must be said, is the feeling of being back on your bike after it’s been thoroughly serviced by a trained bike mechanic.
Other than ensuring yourself and your bike are ready for Sunday’s ride, now’s the time to consider what you’ll be carrying during the epic event. A saddle bag is highly recommended – it would be wise to carry a spare tube, mini pump, lube and basic tools.
Rest up in the days before the ride and we look forward to seeing you there!”
Read more at the Bicycling Australia website.